MICROCONTROLLER BASED TEMPERATURE SCANNER
Description
Function :
Microcontroller based Temperature Scanner is designed for fast and accurate measurement and control of the Process Temperature. The Scanner monitors & displays the Process Temperature as well as does ON / OFF Control according to the Programmed Set Point.
Microcontroller based design. |
Input from RTD (PT100) or Thermocouple (J type OR K type). |
Standard channels available are 8 or 16 |
7-Segment LED Display : • 4 Digit for displaying data. • 2 Digit, for Process Parameters. • 1 or 2 Digits, for indicating channel No. |
LEDs for indication of the process control action with Relay output Contacts. |
Fully Programmable through Membrane Keyboard. |
Flexible input channel grouping facility. |
Channel skipping facility. |
Programmable Lo & Hi set points. |
Programmable display update time. |
Programmable Relay Logic & LED Logic. |
Auto & Manual mode of operation. |
Programmable Auto or Manual Reset facility. |
Password protected Program Mode, calibration Mode. |
Software Calibration facility for input and 4-20 mA output. |
Sensor Open, Sensor Short indication. |
Optional Features
System OK status. |
4-20 mA current output proportional to max. Temp in corresponding group or Temperature of individual channel. |
4-20 mA Current Output corresponding to channel No. |
RS-232 or RS-485 communication compatible to MODBUS RTU protocol. |
PROFIBUS Connectivity (DP V0). |
Supply Voltage | : 110V AC or 230V AC, 50Hz or 24V DC or 48V DC or 110V DC or 220V DC |
---|---|
Input | : RTD (PT100) or Thermocouple (J type or K type) |
No. of Channels | : 8 or 16 or 24 or 32 Nos. |
Channel Grouping | : Flexible or as per specific requirement (Four Groups max.) |
Output | : A) Relay Contacts: Contact rating 5A, at 230 Vac, 50Hz resistive. > 1 C/O per group for Lo set point & Hi set point > 1 C/O for System OK (optional) B) 4-20 mA Output (optional): > Corresponding to process Temp > Corresponding to channel No. > Corresponding to max. temperature channel in group |
Temperature Range | : 1) 0 to 400°C for RTD 2) 0 to 1000°C for J type thermocouple 3) 0 to 1200°C for K type thermocouple |
Accuracy | : Better than +/- 0.5% of FS (Excluding the External Sensor) |
Resolution | : 0.1°C for RTD, 1°C for Thermocouple |
User Interface | : Membrane Keys on Front Facia |
Display | : 8 Digit,1/2", 7-segment LED Display For MCTS 101 & 101P, 7digit, 0.3", 7-segment LED Display for DIN Rail mounted Type 6 ch. Temp. Scanner |
LED Indication | : 1) Status Indication – PRG, RUN, VFY & System OK. (3mm, LED) 2) Control Indication – a) Green LED: I/P > Lo set point b) Red LED : I/P > Hi set point |
Scan Time | : 2 – 60 seconds (programmable) for display updation |
Trip Delay | : 2 – 60 seconds (programmable) |
Enclosure | : Field Mounted : Sheet Steel, IP-55 Grade, suitable for field mounting. Customer Specific Enclosure available optionally |
Temperature Scanners are ideally suited for H.T. Motors. These are also used to measure & Control the Process Temperatures in Process Industries.